Back to Parent

Final Bill of Materials

Our initial BOM was way out of scope for this project totaling in at over $700. We have since adjusted our prototype designs to fall within the $100 budget range.

The Brain:
  • 1 x Acrylic Sheets 24" x 24"x .47"
  • 3 x Acrylic Sheet 12" x 12" x .23"
  • 5 x Balsa Wood 1" x 1" x 36"
  • Screws & Bolts
  • 2 x Spray Paint
  • 1 x Stepper Motor
  • 1 x Stepper Motor Driver
  • 1 x Door Magnet Sensor
The Signal:
  • 2x Chef Jackets Waiter Coat Short Sleeves Underarm Mesh Many Colors
  • 2x Bone Conductor Transducer with Wires - 8 Ohm 1 Watt
  • 1x Stereo 3.7W Class D Audio Amplifier - MAX98306
  • 1x Aunt Martha's 28-Inch by 35-Inch Cotton Kitchen Apron, White
  • 1x TF Card U Disk Mini MP3 Player Audio Voice Module Board For Arduino DFPlayLO
The Hat:
  • 1x Chef hat
  • 1x Metal head scratcher
  • 1x 3D-printed gears and housing
  • 1x Heavy guage wire frame
  • 1x Elastic cotton outer covering
  • 1x Velcro head strap
  • 1x Brushless DC fan
  • 1x Servo
  • 1x Soil monitor
  • 1x On/off switch
  • 1x Particle photon
  • 1x Breadboard and wiring

Content Rating

Is this a good/useful/informative piece of content to include in the project? Have your say!

0