I found the solution to be quite intuitive and feasible, when I discovered that there are soil moisture sensors available in the studio. Since I don't have the irrigation system available around, I decided to use the motor to simulate the irrigation system.
The solution, "Automatic Irrigation System", is set up as the above picture. When the moisture level is low (set up as "<1500"), the motor is off, and the led indication off. When the moisture level is high (">1500"), motor on with different turn frequencies based on the level, and the led on.
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .