Back to Parent

Outcome

At this stage, you can see the functionality of the device and how it could enhance the original object. 

With the magnet attached to the lid of the case, when the lids are closed, the magnet meets the Hall Effect Sensor, setting off the timer for 6 seconds (rep. 6hrs). Users can use the blue button to turn off the blue LED will light (and essentially remove their cleaned contact lens). Within 26 seconds (rep. 26 days), the yellow LED will light up. A video of how Fresh Eyes works is below. 

Additionally, the video after that is the serial monitor view of the device working through its steps. 

1. "CLEANING STARTED" = Lid has been closed/magnet has met the sensor

2. "YOUR CONTACTS ARE CLEANED!" = 6 seconds (rep. 6 hours) has passed, blue LED turns on, and contacts have been cleaned

3. "TIME FOR A NEW PAIR OF CONTACTS" = 26 seconds (rep. 26 days) has passed, yellow LED turns on, and contacts should be thrown out/replaced by a new pair


Content Rating

Is this a good/useful/informative piece of content to include in the project? Have your say!

0