Back to Parent


Description: Macintosh HD:Users:christianbaca:Downloads:IMG_4078.JPG

The basics needed for this appliance to work are a temperature sensor and a fan. Since attaching a fan would be above my current skill set, the components used are a temperature sensor, a LED, and a piezo buzzer. The LED and piezo buzzer go off when the fan would start in the real scenario.

For the code, I started with the sample code in the tutorials for the temperature sensor and the LED. In the beginning, I was completely lost on the coding aspect of this project. I went to office hours and Joseph explained to me that there can only be one void setup and one void loop for an entire code. After office hours, I was able to condense my code into one void setup and one void loop and write the simple code to have the LED and piezo buzzer turn on when the temperature was above 73 degrees.

Content Rating

Is this a good/useful/informative piece of content to include in the project? Have your say!